Mircom FA-300-6L Series Especificaciones descargar pdf (Pagina 57)

FA-300-6L Installation and Operation Manual

Command Menu-->Dialer Config

Telephone Line

Note: Refer to How to Use the Keypad to Program the FA-300 on page 34 for detailed instructions on

making menu selections.

Command Menu/Dialer-Config/Telephone

Line

1. Line#1 Dialing Type

[X] DTMF Dial->Default

[ ] Pulse Dial

Set the dialing type for line #1;

this is the type recognized or

preferred by the telephone

company.

Command Menu/Dialer-Config/Telephone

Line

2. Line#2 Dialing Type

[X] DTMF Dial->Default

[ ] Pulse Dial

Same as Line#1.

Command Menu/Dialer-Config/Telephone

Line

3. Line#1 wait for Dial tone

[X] ENABLE ->Default

[ ] DISABLE

Use this function to let the

system know whether or not to

wait for a dial tone before

dialing. Cell phone setup for the

dialer requires that the system

not wait for dial tone before

dialing.

Command Menu/Dialer-Config/Telephone

Line

4.Line#2 wait for Dial tone

[X] ENABLE ->Default

[ ] DISABLE

Same as Line#1.

Command Menu/Dialer-Config/Telephone

Line

5.Number of retries

06 ->Default

Set the number of retries for

both line#1 and line#2. This

function lets the dialer retry on

either line if it is busy or not

available. If the retry count

expires, the panel reports a line

trouble.

1 Line1 Dialtype

2 Line2 Dialtype

3 Line1 Dialtone

4 Line2 Dialtone

- Telephone Line -

5 Num of Retries

Line#1 Dialing Type:

[X] DTMF Dial

Line#2 Dialing Type:

[X] DTMF Dial

Line#1 Wait Dialtone

[X] ENABLE

Line#2 Wait Dialtone

[X] ENABLE

Number of Retries:

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Comentarios a estos manuales

Sin comentarios

Mircom FA-300-6L Series Especificaciones Pagina 57

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Mircom FA-300-6L Series